Mountainbike Bearing Mudguard
Homemade bearing Mudguard for full suspension mountain bike
![](https://sp-ao.shortpixel.ai/client/to_webp,q_lossy,ret_img,w_768,h_1024/https://www.worldcycling1.com/wp-content/uploads/2023/09/IMG_4126-768x1024.jpg)
![フロントホイール](https://sp-ao.shortpixel.ai/client/to_webp,q_lossy,ret_img,w_1024,h_768/https://www.worldcycling1.com/wp-content/uploads/2022/01/IMG_1236-1024x768.jpg)
The Fullsuspension mountainbike bearings are so Muddy that you can’t see them.
There was a time when I had a mudguard on the rear, but it just didn’t feel right.
![STFUチェーンガイド](https://sp-ao.shortpixel.ai/client/to_webp,q_lossy,ret_img,w_768,h_1024/https://www.worldcycling1.com/wp-content/uploads/2022/11/IMG_2750-768x1024.jpg)
I came up with the idea of cutting out a Race number and making it myself, so after some trial and error I ended up with a nice result.
You can also make your own by cutting old tubes.
The tipp is to make a small notch to make it fit.
![](https://sp-ao.shortpixel.ai/client/to_webp,q_lossy,ret_img,w_768,h_1024/https://www.worldcycling1.com/wp-content/uploads/2023/09/IMG_4126-768x1024.jpg)
![bearing guard](https://sp-ao.shortpixel.ai/client/to_webp,q_lossy,ret_img,w_768,h_1024/https://www.worldcycling1.com/wp-content/uploads/2023/09/IMG_4125-768x1024.jpg)
ディスカッション
コメント一覧
まだ、コメントがありません